|
CRANES
for Material Handling |
|
Detailed Information
in PDF Format for quick & easy downloading & printing |
|
|
|
|
|
If
files above do not open,
Click Below for Free Download |
|
|
E-Lift
Material Handling Solutions |
|
WORK STATION JIB CRANES:
these cranes are an ideal substitute for traditional, heavy I-Beam
Jib Cranes. These jibs are designed to service circular areas and
support tool balancers, air balancers, vacuum lifters, and hoists.
When floor mounted, they can accomodate up to a 360° rotation.
Capacities are available from 100 lbs. to 1000 lbs. with spans up
to 16 ft.
- Capacities from
100 lb. to 1000 lb., with spans up to 16 ft.
- Offer 360°
rotation.
- Most can be bolted
directly to existing floor without adding special foundations.
- Utilize enclosed
track for the boom assembly, which reduces dead weight for easier
rotation than traditional I-beam jibs.
- Feature a retaining
pin through the pivot pin to help resist accidental upward dislodgment
of the boom assembly.
- Include hoist trolley.
- Roller bearings
provide for unsurpassed ease of movement.
back to top
|
ARTICULATING WORK STATION JIB CRANES:
This
versatile crane can move loads around corners, reach into machines
or doorways, and swing under obstructions. This
crane is perfect in applications that require an operator to rotate
the jib in close to the pivot point. Capacities from 150 lbs. to
2000 lbs. with spans up to 16 ft.
- Floor mounted for
easy installation/relocation
- Available in capacities
from 150-2000 lbs. and spans up to 16 ft.
- 360º rotation
at both pivot points (optional)
- Suited for applications
where loads need to be positioned around obstructions, through
doorways, or close to a free standing mast or building column.
- Effortless rotation
- Ideal for use with
hook mounted lifting devices (electric, air or vacuum)
back
to top
|
CEILING MOUNTED BRIDGE CRANES: When
a work area must be free from any support structures that may interfere
with operations, ceiling mounted bridge cranes are an excellent
solution to keeping floors clear. Handling
capacities up to 4000 lbs. with overall bridge lengths up to 34
ft., these systems are pre-engineered and modularly designed for
easy installation, expansion, and relocation. Customers can install
multiple bridges along one set of runways and greatly increase their
productivity.
- Available in steel,
aluminum, and stainless steel.
- Capacities from
250 lb. to 4000 lb., with spans up to 30 feet.
- Easy to install,
move, and position.
- Support steel doesn't
interfere with the handling operation.
- Require buildings
with adequate overhead structures.
back
to top
CEILING
MOUNTED MONORAILS:
|
FREE STANDING WORK STATION BRIDGE CRANES:
Gorbel Free Standing Work Station Bridge Cranes can handle the toughest
overhead lifting tasks. These
cranes, which can be installed on any normal 6-inch reinforced concrete
floor, feature a pre-engineered, modular design that can easily
expand as your work centers expand.
- Available in steel,
aluminum, and stainless steel.
- Range in capacities
from 250 lb. to 4000 lb., with spans up to 30 feet.
- Easy to install,
relocate, and expand.
- Provide ease of
movement and positioning.
- Doesn't put stress
on the building's overhead structure.
- Requires a reinforced
concrete floor of at least 6 inches.
back
to top
|
|